allowable stress的例句大全

Themaxium range of allowable stress under different reliability is given.

文中还给出了对应于不同可靠度下的最大容许应力幅值.

Some datum, for example safety factor and allowable stress are put forward based on production practice.

提出的设计数据如安全系数、许用应力均根据生产实践的应用所确定.

The allowable stress number, load, geometry parameters and life have the most significant effects on pitting resistance rating results;

试验齿轮的应力修正系数、载荷和几何参数对弯曲强度计算结果的影响较大。

Strength Design values may be converted to Allowable Stress Design values.

设计要求、强度设计值可转换为许用应力设计值。

The analysis results show that the strength of the axle satisfy the allowable stress requirements.

分析结果表明，该车轴强度满足材料的许用应力要求。

Influence of Lowered High-temperature Allowable Stress on Application of Steel CASE 2180

高温许用应力下调对CASE2180钢使用的影响

Design allowable stress of arch dam in China comparing with that in American

中国拱坝设计容许应力与美国的比较

The requirements for allowable stress design of masonry were retained and strength design provisions were first included in the American Building Code Requirements for Masonry Structures ( ACI 530-02/ ASCE 5-02/ TMS 402-02) in the 2002 edition.

美国砌体结构建筑规范（ACI530~02/ASCE5-02/TMS402-02），2002年规范修订版在容许应力设计原理的基础上，首次给出了砌体结构强度设计准则规定。

A Calculation of the Allowable Anti-pulling Force of Shallow-buried Retaining Wall with Anchored Bulkhead in Triaxial State of Stress

三向应力作用下浅埋锚定板的容许抗拔力计算

Ultimate state analysis of carrying capacity and tensile fatigue analysis are conducted according to basic combination of loads effect and standard combination of loads effect respectively. Design of foundation screws through allowable stress design method is presented.

按荷载效应的基本组合进行承载能力极限状态分析，按荷载效应的标准组合进行抗拉疲劳分析，采用许用应力设计法进行地脚螺栓的设计。

As for the calculation, the old allowable stress design method and the more simple formula are adopted, not the present limit condition calculation method and its complicated formula stated in the 《 Steel Structure Design Code 》.

在计算方法上不是采用现行《钢结构设计规范》中的极限状态设计法及其较繁的计算公式，而是采用锅炉行业过去习惯采用的许用应力设计法及其较简单的计算公式。

Allowable stress and strength design method of masonry code in the United states& flexure design

美国砌体规范的容许应力与强度设计方法&梁的抗弯设计

Discussion on the Increased Range of Allowable Stress in the Design Code for Industrial Metallic Piping

对工业金属管道设计规范中许用应力提高幅度的探讨

Based on mechanical analysis and testing research, the paper put forward a calculation method of interlayer allowable shear stress and the design method of asphalt pavement considering shear strength.

并且，在力学分析和试验研究的基础上，提出了层间容许剪应力的计算方法和考虑抗剪强度的沥青路面结构设计方法。

The underground penstock for the Husonghe Hydroelectric Power Station was designed using the calculation method of raising the allowable stress as an open conduit;

户宋河电站地下埋管主管的设计，采用按明管设计提高允许应力的计算方法；